Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

linking CPU313 and ET200M

Created by: TKIP at: 7/24/2007 8:46 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/24/2007 8:46 AM	Rate (0)
TKIP Posts: 4 Rating: (0)	Hello everybody! I have a CPU313(6ES7 313-1AD00-0AB0) without Profibus DP and an ET200M. To connect between them I use the CP 342-5 module but I don't know how to access value of I/O modules on ET200M. Can I access directly value of I/0 modules like using CPU having Profibus DP or have to use a FB, FC or SFB, SFC? Thank you very much!
TKIP Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/24/2007 9:01 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	Hello, When you use CP342-5, you'll have to use the FC1 and FC2 (DP_send and DP_receive) Here is a link with valuable information: http://support.automation.siemens.com/WW/view/en/18208090 I hope it will help you Best regards, Wizard

Suggestion To thank Quote Answer

7/24/2007 10:37 AM	Rate (0)
TKIP Posts: 4 Rating: (0)	this information is very valuable with me thank you for helping me best regards TKIP
TKIP Posts: 4 Rating: (0)	Last edited by: TKIP at: 24.07.2007 11:05
Suggestion To thank Quote Answer

7/24/2007 10:46 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	You are welcome Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on