Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Load Monitoring

Created by: SPS_AliHariri at: 1/26/2020 2:22 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/26/2020 2:22 PM	Rate (0)
SPS_AliHariri Regular Member Joined: 9/6/2018 Last visit: 3/2/2023 Posts: 18 Rating: (0)	Dear All, i have following question i am asking for assistance i am using Siemens Thyristor with Monitoring unite 3RF2950-0AG16 to supply current to the Heater it shows me always Load Fault but the current is stable could you explain to me how to solve this fault if you can provide me with Manual Thanks

Suggestion To thank Quote Answer

1/29/2020 2:00 PM	Rate (0)
Sirius_3 Advanced Expert Joined: 4/15/2009 Last visit: 3/20/2023 Posts: 88 Rating: (4)	Hello, If the error occurs, the function module may be connected incorrectly. To check this, please contact technical support directly. Support Request:www.siemens.de/support-request Thanks Best regards Sirius_3

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on