Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Login Issue due to shotcut icon.

Created by: javed88 at: 7/17/2013 8:03 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/17/2013 8:03 AM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 1/6/2025 Posts: 262 Rating: (5)	Hie to all I am having a strange isssue in TIA V11 Proffessional. Actually i am using some User name and Password in my Scada Software and its running fine if i am running that file from Design mode .i.e first going in Design mode and from there Going to run mode . But in customer PC only runtime software is there so i take the Runtime icon from File .i.e. pdata.fwc and paste it on desktop and run the file. Now the file is getting open and its working fine only the thing is that it is not taking the same user name and password. for all username and password it showing invalid login. Kindly help
	JAVED AKHTAR
Suggestion To thank Quote Answer

7/17/2013 8:20 AM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (10)	javed88 Hie to all I am having a strange isssue in TIA V11 Proffessional. Actually i am using some User name and Password in my Scada Software and its running fine if i am running that file from Design mode .i.e first going in Design mode and from there Going to run mode . But in customer PC only runtime software is there so i take the Runtime icon from File .i.e. pdata.fwc and paste it on desktop and run the file. Now the file is getting open and its working fine only the thing is that it is not taking the same user name and password. for all username and password it showing invalid login. Kindly help some time its asking user login domain have you check that
ALGUDKAR RAO Posts: 621 Rating: (10)
Suggestion To thank Quote Answer

7/17/2013 9:50 AM	Rate (0)
javed88 Bronze Member Joined: 7/19/2011 Last visit: 1/6/2025 Posts: 262 Rating: (5)	Thanks for the reply I checked that one also but result was same.
	JAVED AKHTAR
Suggestion To thank Quote Answer

7/17/2013 7:55 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 1/8/2025 Posts: 711 Rating: (30)	Hi javed, for a try, just download the project in to ES itself ( via download-> file-> select dest folder in your pc itself and load). after that copy entire folder in to RT system and try. As i remember, along with .fwc file, there should be 2 more supporting file. regards vipz
	Last edited by: vipz at: 7/17/2013 8:04 PM ONE MORE, IN WINCC ADVANCE RT FILE IS .FWC. IN PROFESSIONAL IT IS .MCX. SO PLEASE TELL YOU ARE USING WINCC PROFESSIONAL/ ADVANCE. ADVANCE YOU CAN TRY VIA DOWNLOAD AS MENTIONED ABOVE. With Best Regards VIPZ
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on