Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO 0BA7 - Extending Program Problem

Created by: Roy_1977 at: 2/14/2012 9:01 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/14/2012 9:01 PM	Rate (0)
Roy_1977 Posts: 4 Rating: (0)	Hello, Recently Upgrade a LOGO 0BA6 to OBA7. Now i'm extending the original program due to electrical expansion but got a problems with it. - Added the new functions to it but get message "Unsifficient Resources" So i reached the max capacity of 400. - Simplefied the program, but still get the message "Unsifficient Resources" Don't now why, but think it still count the blocks as the original program even when it's simplefied? So my what can i do now ?? Do i need to use now a small PLC for the capacity and can i then still use the same .lsc program? Or is there a simple solution to still run it withmy brand newLOGO 0BA7 ?? Hope some one has a good solution...
Roy_1977 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/15/2012 7:34 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, Did you pick the right Logo from the list? CTRL+H or Tools ----> Select Hardware. The Logo you are working with is shown in the lower-right corner. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

2/15/2012 11:26 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, post you program and let us try to reduce the program.
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

2/15/2012 5:30 PM	Rate (0)
Roy_1977 Posts: 4 Rating: (0)	Hello, Hope you can do something with it... Attachment 0BA7 NotCompleted.zip (191 Downloads)
Roy_1977 Posts: 4 Rating: (0)	Last edited by: Roy_1977 at: 2/16/2012 8:15 PM
Suggestion To thank Quote Answer

2/15/2012 5:52 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, first thing i noticed was a lot of constructions with 3 and blocks with empty inputs, see picture what i mean. There are some blocks(111) less needed if you only change that. Regards, Marcjan Attachment forum32.JPG (193 Downloads)
	Last edited by: Marcjan at: 2/16/2012 7:26 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on