Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! 8 Web Server, cant modify any value

Created by: Magdy Elsemary at: 10/28/2015 9:20 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/28/2015 9:20 AM	Rate (0)
Magdy Elsemary Posts: 17 Rating: (1)	Hi all i make a web server for LOGO V8 and it working good but i cant modify any value i just monitor the values another thing i can log on it just in the same network when i try to log on from any other network didn't log on ------------------------------------------------------------------------------------------ Split from LOGO! 8 Web Server Safari IPHONE IPAD.
Magdy Elsemary Posts: 17 Rating: (1)	Last edited by: Min_Moderator at: 10/28/2015 3:48:23 PM New subject after splitting
Suggestion To thank Quote Answer

10/29/2015 5:05 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, if you allow in teh message text to modify parameter, then you can do it also in the Web-server. Just click the parameter and change it. If you want to modify VM-Memory, then use the variable table in the Web-Server. Hope this help
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

11/20/2020 11:43 AM	Rate (0)
LulaKenney Posts: 1 Rating: (0)	Hi, you kan change Values from e.g. markers. Mx OR Ix = Ox.
LulaKenney Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

LOGO!_SW_Webserver_M

Follow us on