Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo 8 with KP300 screen

Created by: andrewd1978 at: 4/13/2016 8:41 AM (13 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

4/13/2016 8:41 AM	Rate (0)
andrewd1978 Posts: 5 Rating: (0)	Hi i am using the Logo 8 and want to use the KP300 screen as it has more fuctions thant the TD screen. one is the screen able to be used with the base unit and two how do i add more functions in the software as the software only shows 4 for the td screen. Thanks
andrewd1978 Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/13/2016 9:17 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Yes, it's possible that Logo 0BA communicate with a KP300 Basic mono. On this Siemens webside there is an example: HMI communication starting from WinCC V11.x (TIA Portal)

Suggestion To thank Quote Answer

4/13/2016 4:53 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, You can use Win CC basic V13 to create the project for a KP300. If you then start the simulation then an the PC you can see the HMI screen and you also can press buttons for testing without a KP300. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

5/10/2016 10:10 PM	Rate (0)
andrewdaw1978 Posts: 200 Rating: (6)	hi i know have all the required kit and have from the help sections followed the links to connection of the kp300 to the TIA software i have set all the required functions for the screen but i am having trouble connecting to the screen i have the correct cable so i kn ow its not that but i think it something to do with the IP address
andrewdaw1978 Posts: 200 Rating: (6)
Suggestion To thank Quote Answer

5/11/2016 6:02 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	Hello, Can you make screenshots of the connection settings? Both on the WinCC side and in the logo.
	Last edited by: ixo65 at: 5/11/2016 6:02:32 AM
Suggestion To thank Quote Answer

5/11/2016 8:00 PM	Rate (0)
andrewdaw1978 Posts: 200 Rating: (6)	please see attatched Attachment Doc1.pdf (402 Downloads)
andrewdaw1978 Posts: 200 Rating: (6)	Last edited by: Min_Moderator at: 5/12/2016 9:03:43 AM Convert attachment to pdf
Suggestion To thank Quote Answer

5/11/2016 8:19 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	And the screenshots of the Logo side?
	Last edited by: ixo65 at: 5/11/2016 8:21:50 PM
Suggestion To thank Quote Answer

5/11/2016 8:23 PM	Rate (0)
andrewdaw1978 Posts: 200 Rating: (6)	logo side Attachment Doc1.pdf (349 Downloads)
andrewdaw1978 Posts: 200 Rating: (6)	Last edited by: Min_Moderator at: 5/12/2016 9:04:44 AM Convert attachment to pdf
Suggestion To thank Quote Answer

5/11/2016 8:30 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	No, that is a screenshot from the attempt to connect. I meant a screenshot of the connection settings on the logo side. You need just configure a connection as you do it in WinCC in the logo. Which is also in the example of Siemens.

Suggestion To thank Quote Answer

5/11/2016 8:48 PM	Rate (0)
andrewdaw1978 Posts: 200 Rating: (6)	hope this is the one you mean Attachment doc2.pdf (389 Downloads)
andrewdaw1978 Posts: 200 Rating: (6)	Last edited by: Min_Moderator at: 5/12/2016 9:05:27 AM Convert attachment to pdf
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on