Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO AND 'K' TYPE THERMOSOUPLE

Created by: STOKIE at: 9/12/2006 4:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/12/2006 4:00 PM	Rate (0)
STOKIE Posts: 10 Rating: (4)	Can you connect a Type K Thermocouple direct to a Logo! unit or do we have to connect via a signal convertor.
STOKIE Posts: 10 Rating: (4)
Suggestion To thank Quote Answer

9/12/2006 4:55 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Hi No you can not connect directly. You must use transmiter (current or voltage). In this way You can receive corect signal. It does not matter which is the control unit after that. I mean ratio price/effection. best regards

Suggestion To thank Quote Answer

2/15/2008 12:20 PM	Rate (0)
UAEMAN Posts: 5 Rating: (0)	UMENCHO Hi No you can not connect directly. You must use transmiter (current or voltage). In this way You can receive corect signal. It does not matter which is the control unit after that. I mean ratio price/effection. best regards hi can you give me an example of this transmiter?? best regards
UAEMAN Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on