Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO Arrow down button behavior

Created by: bflipse at: 6/21/2023 9:56 AM (6 Replies)

Rating (1)

Thanks 2

7 Entries

6/21/2023 9:56 AM	Rate (0)
bflipse Member Joined: 7/24/2013 Last visit: 6/29/2023 Posts: 4 Rating: (0)	Dear all, Currently I'm working on a LOGO on which I can change a program setting using the display buttons [run time of a pump]. For this I'm using arrow left/right which triggers a shift register. Based on the desired setting, one of several 'Message text' blocks are called, each displaying its own specific settings. The problem is that if I accidentally press the arrow down button the LOGO suddenly displays the date and time. If I press arrow up again I'm coming back to my own message text block. So apparently there is a message text, or default screen, with the highest priority. It can be called using arrow down. This is not something I programmed but seems to be a default setting in the LOGO itself. Can this be changed / overruled somehow? I've searched everywhere but cannot seem to find anything about this. I do not want this behavior because I want the arrow buttons to perform something else. Best regards, Bas

Suggestion To thank Quote Answer

6/21/2023 10:32 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/3/2023 Posts: 31538 Rating: (3919)	Please upload your program as a ZIP file.

Suggestion To thank Quote Answer

6/21/2023 11:18 AM	Rate (0)
bflipse Member Joined: 7/24/2013 Last visit: 6/29/2023 Posts: 4 Rating: (0)	Hello, Thanks for your reply and please see my program attached. Best regards, Bas
	Last edited by: bflipse at: 06/21/2023 11:59:51
Suggestion To thank Quote Answer

6/21/2023 11:34 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/3/2023 Posts: 31538 Rating: (3919)	If I see it right: You press only the cursor down key without the ESC key? If so, then this behavior can't be changed. Pressing the cursor down key (without the ESC key) exits the message text level and the start screen is displayed. From there, pressing the ESC key takes you to the LOGO! menu level. This is what Siemens wanted. Otherwise you could not use the cursor keys for program functions with active message texts.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bflipse

6/21/2023 11:56 AM	Rate (0)
bflipse Member Joined: 7/24/2013 Last visit: 6/29/2023 Posts: 4 Rating: (0)	Okay, thanks for the reply! I understand this is a 'fixed' LOGO 'thing'. Regards, Bas

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

6/21/2023 11:59 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/3/2023 Posts: 31538 Rating: (3919)	bflipse Okay, thanks for the reply! I understand this is a 'fixed' LOGO 'thing'. Regards, Bas Yes it is.

Suggestion To thank Quote Answer

6/21/2023 12:01 PM	Rate (0)
bflipse Member Joined: 7/24/2013 Last visit: 6/29/2023 Posts: 4 Rating: (0)	Okay, thanks again - Bas

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on