Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo Connections SD Card and Data Logger

Created by: rodri.ali.ve at: 4/13/2017 3:54 PM (5 Replies)

Rating (1)

Thanks 1

6 Entries

4/13/2017 3:54 PM	Rate (0)
rodri.ali.ve Posts: 2 Rating: (0)	Hi, I would like to know if i am able to connect two PLCs Logo 8 in order to obtain the data from the SD card from the first PLC and store it in the second PLC. I mean, one PLC will be in an static place and will be my data logger. The other PLC will be installed in a truck, so when the PLC in the truck is connected to the static PLC I need that all data stored in the static PLC got transfered to the SD card of the PLC in the truck. Thank you in advance
rodri.ali.ve Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/13/2017 4:00 PM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2023 Posts: 31602 Rating: (3930)	No, a transfer of the logged data from an SD card of a LOGO! to the SD card of another LOGO! via the normal LOGO! Connection is not possible. This can only be copied by a PC from one SD card to another SD Card.

Suggestion To thank Quote Answer

4/13/2017 5:11 PM	Rate (0)
rodri.ali.ve Posts: 2 Rating: (0)	Thank you so much for your answer. I must look another option
rodri.ali.ve Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

4/13/2017 5:32 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2023 Posts: 31602 Rating: (3930)	Hello rodri.ali.ve, you're welcome.

Suggestion To thank Quote Answer

11/22/2017 8:49 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 12/7/2023 Posts: 7572 Rating: (156)	New question published by vaggmin is split to a separate thread with the subject how can log data into excel from LOGO PLC?. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

12/8/2017 3:34 PM	Rate (0)
AlanTrollip Advanced Member Joined: 8/15/2015 Last visit: 12/3/2023 Posts: 65 Rating: (7)	rodri.ali.ve Hi, I would like to know if i am able to connect two PLCs Logo 8 in order to obtain the data from the SD card from the first PLC and store it in the second PLC. I mean, one PLC will be in an static place and will be my data logger. The other PLC will be installed in a truck, so when the PLC in the truck is connected to the static PLC I need that all data stored in the static PLC got transfered to the SD card of the PLC in the truck. Thank you in advance Hi Did you ever get a plan for this ? sounds very similar problem to mine.
	The more mistakes I make, the faster I learn!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on