LOGO Eprom

Dear all

Good day 

if i download program directly to LOGO BM  then i put memory in logo 

the program will transfer automatically or not ?

so if i take the memory to another LOGO BM the program transfer with it to a new LOGO or not ?

thank you very much brother 

Magdy Elsemary

thank you very much brother 

For thanks there's a button....

There is also a second way:

Insert SD card into the PC. Then save the logo diagram as a binary file on the SD card.

File> Save As

and then not saved as *.lsc file, but as a *.bin file (binary dump).

Dear friend 

in old version if you communicate with USB cable 

i can't  find check mark to save on SD card  

what do you think the program will transfer to memory card or not?

software:soft comfort V8

hardware: 0BA6

In older logos with USB cable, the program can not be written directly to the memory chip, because the cable plugged in so the shaft where the memory card usually infected.

Only transfer the program with the USB cable to the logo and then remove the cable.
Then plug the memory module.
Then switch on the logo and go to the main menu.
Select the entry "card", press OK button.
Then select "Logo > Card" (first entry), press OK button.

im sorry if this question look stupid 

i have LOGO with no display .. no solution ??