Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo locked

Created by: GHF at: 1/19/2017 4:38 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/19/2017 4:38 PM	Rate (0)
GHF Posts: 1 Rating: (0)	I have a Logo 6ED1 052-1HA00-0BA0 with the following problem. Logo locked in the inputs and outputs screen. It does not respond to the arrow keys to stop the program and to modify the program. The only answer is to press the keys ESC and OK together, the screen for set clock appears and modify parameters.
GHF Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/23/2017 9:07 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, LOGO! 0BA0 is too long ago. But on the Siemens internet you can download all version of the LOGO! manual. Go to: www.siemens.com/logo On the right hand side you can find technical information. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

8/5/2021 7:05 PM	Rate (0)
AutoGen_1005847 Member Joined: 4/28/2015 Last visit: 8/5/2021 Posts: 2 Rating: (0)	From the manual: Earlier versions up to 0BA3 with/without display are automatically switched to PCLOGO mode as follows: 1. Switch off the power supply to the LOGO!. 2. Remove the cover or the program module (card) and connect the cable to this socket. 3. Switch on power. LOGO! switches automatically to PC LOGO mode. The PC can now access the LOGO! For information on this function, refer to the LOGO!Soft Comfort Online Help. You need to connect the logo cable before powering up and it will stop the rogram in the older versions of Logo.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on