Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! Simply ingenious - Tips and tricks (Video)

Created by: ixo65 at: 10/18/2016 6:13 PM (5 Replies)

Rating (2)

Thanks 5

6 Entries

10/18/2016 6:13 PM	Rate (2)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/5/2023 Posts: 31552 Rating: (3920)	LOGO! Simply ingenious - Tips and tricks (Video)

Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users Automation Program Noxenn Dinos Vivek Kansara

10/19/2016 5:56 AM	Rate (0)
Noxenn Posts: 18 Rating: (0)	Many times thank you for sharing this link. It is worth looking at the videos. Feedback from me for Siemens.. Video picture is very very good. The English audio is good, but 'NO switch' is best to say 'normally open switch'. German audio sounds like talking inside tunnel. English text has spelling mistake. The download file is big. Maybe good if give also version with lower quality video to make download smaller. Mr Helmut is very good presenter. He looks at camera and give energy - especially for the end slogan. The videos are short and to the point with good tips someone can learn many from. Thankful for Siemens for making available this professional learning tool. Bye. Attachment Exercise.gif (55 Downloads)
Noxenn Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

10/19/2016 6:37 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/5/2023 Posts: 31552 Rating: (3920)	Hello Noxenn, It is always good when someone gives feedback. But it would have been better if you had submitted this feedback on the website, where the download link is located.

Suggestion To thank Quote Answer

2/9/2017 9:04 AM	Rate (0)
Melon777 Posts: 53 Rating: (12)	Now updated with new content: Networking LOGO! via drag&drop Marking connecting lines in color Programming exercise: Light and fan control New:Programming exercise: PI controller New:Programming exercise: Webserver New:Programming exercise: Function keys New:Programming exercise: Changing parameters New:Using the Access Tool to read data
Melon777 Posts: 53 Rating: (12)
Suggestion To thank Quote Answer

2/9/2017 2:33 PM	Rate (0)
Vivek Kansara Bronze Member Joined: 9/3/2009 Last visit: 12/3/2023 Posts: 153 Rating: (11)	Hello ixo65 , thanks for sharing. regards.
	Last edited by: vkkepl at: 2/9/2017 2:34:45 PM
Suggestion To thank Quote Answer

2/9/2017 3:18 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/5/2023 Posts: 31552 Rating: (3920)	vkkepl Hello ixo65 , thanks for sharing. regards. Hello vkkepl, you are welcome...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Vivek Kansara

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on