Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! Soft Comfort : Using ok/esc buttons

Created by: shedin422 at: 6/15/2016 9:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/15/2016 9:19 PM	Rate (0)
shedin422 Posts: 7 Rating: (0)	Hi! While I am able to use the arrow keys (only when holding down esc) I am unable to use the 'ok' and 'esc' buttons on my logo in my program. Is there a way to do this? Thanks! I am using Soft Comfort 8.0.1
shedin422 Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/15/2016 9:44 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/25/2025 Posts: 34557 Rating: (4313)	No, this is not possible. In the program, only the cursor keys of the logo and / or of a TD / TDE and the F keys of a TD / TDE can be queried.

Suggestion To thank Quote Answer

6/15/2016 10:19 PM	Rate (0)
shedin422 Posts: 7 Rating: (0)	Is there a way to use the arrow buttons without holding the 'esc' button?
shedin422 Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/15/2016 11:02 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/25/2025 Posts: 34557 Rating: (4313)	shedin422 Is there a way to use the arrow buttons without holding the 'esc' button? No.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on