Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! TD

Created by: Rock on at: 10/28/2012 10:18 AM (3 Replies)

Rating (1)

Thanks 1

4 Entries

10/28/2012 10:18 AM	Rate (0)
Rock on Posts: 2 Rating: (0)	Hi I am using LOGO! TD with LOGO! PLC .Now I require password in LOGO! TD so that any one can not put PLC in STOP mode from LOGO! TD.
Rock on Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/28/2012 12:36 PM	Rate (1)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (709)	Hello, Goto file--> properties---> parameter, in this tab you can enter Password for the Logo, if you use TD it's valid for the TD too. regards, Marcjan Attachment passw.JPG (129 Downloads)
	Last edited by: Marcjan at: 10/28/2012 12:43 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Rock on

10/30/2012 10:52 AM	Rate (0)
Rock on Posts: 2 Rating: (0)	Hello Mar cjan, Thanks for your reply ,but using this settings i can't get the password on stop function in LOGO! TD .Pl reply how to give password on stop function.
Rock on Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/30/2012 3:47 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (709)	Hello, Please have a look at attached part off manual. Regards, Marcjan Attachment logoTD password.pdf (138 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on