Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo + TDE problem

Created by: zaleschief at: 9/7/2016 11:55 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/7/2016 11:55 AM	Rate (0)
zaleschief Posts: 2 Rating: (0)	Hello , I have a logo driver and panel TDE . The problem seems to be easy , but I can not solve it , so I ask you for help . I want to know how to combine them . Is it enough to set the address of the two devices like: driver: 192.168.0.1 panel: 192.168.0.2 Should I do anything else? I wrote the program and the logo08 screen appears as it should. While TDE is still in Offline mode. Sorry for my English.
zaleschief Posts: 2 Rating: (0)	Last edited by: zaleschief at: 9/7/2016 11:56:30 AM Last edited by: Min_Moderator at: 9/7/2016 12:55:09 PM Edit formatting
Suggestion To thank Quote Answer

9/7/2016 12:09 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/22/2024 Posts: 34442 Rating: (4294)	In addition, you must enter the appropriate Logo-IP in TDE or, if already registered, select the IP address. This will tell the TDE with which logo the TDE must communicate. TDE mainmenu > LOGO! Selection

Suggestion To thank Quote Answer

9/8/2016 8:36 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, also check if the message text is enabled for TDE also. Open the message text properties and check mark that you also want to have the message on TDE (enable LOGO! TD and/or Both) screen. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

9/10/2016 10:59 AM	Rate (0)
zaleschief Posts: 2 Rating: (0)	Summarizing : ip address 192.168.0.1 driver 192.168.0.2 panel Highlighted in the text messeage option "both" Written 192.168.0.1 in Logo Selection in panel and still not working. I do not know whether to help, but when I press Logo settings TDEmainmenu-> Network -> IP Address, on the screen appear "Failed to submit"
zaleschief Posts: 2 Rating: (0)	Last edited by: zaleschief at: 9/10/2016 11:11:16 AM Last edited by: zaleschief at: 9/10/2016 11:13:08 AM Last edited by: Min_Moderator at: 9/12/2016 9:20:38 AM Edit formatting
Suggestion To thank Quote Answer

9/12/2016 8:17 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, check the TDE setting. The TDE has it's own IP-ADr. but also requires to know to which LOGO! IP it should connect. See Apendix "D" in the LOGO! Manual. Here you find all menue screen and what you have to do. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

3/6/2017 9:05 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by AutoGen_9550976 is split to a separate thread with the subject Change delay time on TDE doesn't change on the Logo. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on