Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO UPGRADE PROBLEM

Created by: hyo_eddie at: 7/4/2017 11:12 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/4/2017 11:12 AM	Rate (0)
hyo_eddie Experienced Member Joined: 12/25/2016 Last visit: 11/15/2023 Posts: 89 Rating: (0)	Hi all! Can you help me to solve upgrade problem of my LOGO! SoftComfort? See attached for the problem thanks. Attachment logo upgrade problem.png (51 Downloads)

Suggestion To thank Quote Answer

7/5/2017 8:41 AM	Rate (0)
Melon777 Posts: 53 Rating: (12)	Hello, open LOGO! Soft Comfort as Admin (right click, open as Admin) and try to do the upgrade again. I hope it will help you! Regards, Melon
Melon777 Posts: 53 Rating: (12)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MarkP

7/6/2017 1:56 PM	Rate (0)
qwemx Silver Member Joined: 12/28/2016 Last visit: 9/4/2023 Posts: 364 Rating: (6)	Hi if nothing works download the upgrade file and run it link is here http://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/demo-software/Pages/Default.aspx#Updates
	Last edited by: plc_317 at: 7/6/2017 1:57:01 PM Last edited by: plc_317 at: 7/6/2017 2:15:55 PM With kind regards... qwemx
Suggestion To thank Quote Answer

7/7/2017 5:37 AM	Rate (0)
hyo_eddie Experienced Member Joined: 12/25/2016 Last visit: 11/15/2023 Posts: 89 Rating: (0)	thanks.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on