Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO! USB cable on older usb v1.0 ?

Created by: LOGO!Barbarian at: 9/9/2009 10:05 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/9/2009 10:05 AM	Rate (0)
LOGO!Barbarian Posts: 173 Rating: (95)	hey there FORUM! Anybody had any difficulties with the original USB ports (v 1.0) with the LOGO! cable? Maybe someone who setup USB on an old PC where you had to put a ISA or PCI card in a slot on the motherboard to get USB ports if the PC did not have any? Or someone who setup USB under Windows 95 or the first editions of 98 where you had to install special patch software and new drivers? Just asking?!??! Thanks Ooops, I mean Aaaaaarrrggghh!
LOGO!Barbarian Posts: 173 Rating: (95)
Suggestion To thank Quote Answer

9/9/2009 10:39 AM	Rate (0)
Paulvdb Posts: 21 Rating: (2)	Isn't the original LOGO cable RS232 (Serial) ? Because my laptop does not have a Serial port, I had to buy a USB > SERIAL cable ...
Paulvdb Posts: 21 Rating: (2)
Suggestion To thank Quote Answer

9/9/2009 11:16 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, For LOGO! also a USB programming cable is available since a long time. Order number is: 6ed1 057-1aa01-0ba0 Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

9/9/2009 11:22 AM	Rate (0)
LOGO!Barbarian Posts: 173 Rating: (95)	Hey people! I am asking because a friend who has an old laptop with only USB v1.0 ports on it is having this problem using the USB LOGO! cable on this older computer. I am asking a wide range of questions about typical computer configurations int he past when USB first became available - maybe I will get a reply form someone who has had the same sorts of problems with the NEW Siemens LOGO! programming cable that I know has been available since March 2008 (thanks Helmut). Aaaaaarrrgggh!
LOGO!Barbarian Posts: 173 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on