Logo web editor/custom page bug

Hi!

I've been working with logo web editor for a few days now, and I just noticed a pretty bad bug on my pages.

It seems that some digital blocks are not updated with their block value (on reading). Around half of my memento blocks are never updated on the web page and stay Off.

On the attachment you can see M32/M33 are activated (online mode), yet the corresponding "digital value" object are not activated on the web page (cellule active....), yet M34 and M35 are shown correctly.

I've tried using a network ouput instead, recreated the object on LWE, put the object on another page, those tests didn't work.

Putting another memento did work though, and I have a hard time understanding why. Won't solve my problem though, as I'm using 61 out of 64 memento blocks and I don't want to change everything.

I've not had the time to look at the html code yet (I will tomorrow), and I didn't touch the code of this specific page. 

Has anyone had the same issue?

This is the latest version I've tried without custom code on htm pages.

You can try to simply test page "diagnostics" with inputs 6/7/8/9 off on the logo to see which fault shows on the web page (after 60s), corresponding blocks are on page 33 of the program

There's also "Mode actuel" on the main page which is connected via network output and still doesn't work (page 12 of program)

I've checked quickly the htm pages and the fields (range, address, type, lengh) seem to be correct, I'll try creating a new project to see where it goes.

Edit: Removed attachment

I've just transfered my pages to a new project and things work again!

I'll still have to rewrite my tabtable though

Maybe touching code created errors but I doubt it, makes no sense considering pages are regenerated on save

Anyway, thanks for testing, I'll let you know if I have issues again

New question published by nikosp854 is split to a separate thread with the subject How can create a new topic?.

Best regards
Jen_Moderator