Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LR 200 for LPG tanks

Created by: Kazim at: 8/6/2011 1:57 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/6/2011 1:57 PM	Rate (0)
Kazim Posts: 2 Rating: (0)	I am working on designing a LPG storage facility Is it possible to measure the level of pressurized vessel by siemens LR 200 (Radar transmitter).Is there any dielectric constraint ..? As LPG contains vapours so would it disturb the radio waves by coming in contact with radar antenna and mounting procedure as well. I would be thankfull to have a satisfactory reply
Kazim Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/6/2011 10:05 PM	Rate (0)
danw Gold Expert Joined: 3/28/2010 Last visit: 9/18/2023 Posts: 976 Rating: (199)	catalog page says Dielectric constant εr: εr > 1.6 (for εr < 3, use waveguide antenna or stillpipe)

Suggestion To thank Quote Answer

8/8/2011 9:47 AM	Rate (0)
Kazim Posts: 2 Rating: (0)	Thx danw for answering will you lease elaborate it as iam bit confused...!!
Kazim Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/8/2011 2:20 PM	Rate (0)
T Murali Krishna Member Joined: 7/29/2011 Last visit: 10/29/2014 Posts: 10 Rating: (1)	Dear Kazim, You should also take care of the pressure in the Tank, and select the instrument accordingly other wiase electronics would get damaged. It will with stand upto pressure of 3 bar gauge.

Suggestion To thank Quote Answer

8/8/2011 8:15 PM	Rate (0)
Toppie Posts: 74 Rating: (3)	Hello Kazim The only Siemens non-contacting device that should be used for LPG would be the LR400 with 4" horn.If you PM me I can send you some sample sites. Regards Toppie [ \|:)
Toppie Posts: 74 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on