Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LR-260 Remote view

Created by: adolfoleon at: 6/9/2009 2:11 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/9/2009 2:11 PM	Rate (0)
adolfoleon Posts: 1 Rating: (0)	I want to connect two LR-260 to a display near the silo and also see in my office the level. What is the best way to do this?
adolfoleon Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/15/2009 11:08 PM	Rate (0)
Toppie Posts: 74 Rating: (3)	Hi adolfoleon You didn't say what the output of the LR260 was, analog/HART or ProfiPA. If analog you can simply use two RD100 remote displays https://pia.khe.siemens.com/index.aspx?nr=10877 If one needs to provide power you can use one RD200 and one RD100. If Profibus PA, get back to us as we have some third party suggestions. Regards
Toppie Posts: 74 Rating: (3)	Last edited by: Toppie at: 6/15/2009 11:11 PM I forgot to mention, be aware of the loop resistance, max 600 ohms including cable with a 24VDC supply.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on