Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LT Module Issue

Created by: Magesh at: 4/3/2013 10:59 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/3/2013 10:59 AM	Rate (0)
Magesh Posts: 5 Rating: (0)	Dear Expert we had a problem in our CNC machine Spindle,whenever wegive the command for spindleLike M3 S1000, spindle is not rotating it just moving Clockwise then Anti clockwise like an oscillation . there is no Alarm In Spindle Drive Module and CNC . for this issue drive problem or any parameter issue . expect ur valuable feedback ......... LT Module INT 50A Model :- 6SN1123-1AA00-0CA1 thanks In advance .......... magesh
Magesh Posts: 5 Rating: (0)	Last edited by: Magesh at: 4/3/2013 11:00 AM
Suggestion To thank Quote Answer

4/3/2013 7:41 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Magesh Dear Expert we had a problem in our CNC machine Spindle,whenever wegive the command for spindleLike M3 S1000, spindle is not rotating it just moving Clockwise then Anti clockwise like an oscillation . there is no Alarm In Spindle Drive Module and CNC . for this issue drive problem or any parameter issue . expect ur valuable feedback ......... LT Module INT 50A Model :- 6SN1123-1AA00-0CA1 thanks In advance .......... magesh Hello,Looks to be Power module defect.....Check your power module with the help of multimeter in off condition....i.e keep it in diode mode and checkCheck this link and refer the 3 page..Regards,Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

4/4/2013 6:13 AM	Rate (0)
Magesh Posts: 5 Rating: (0)	Dear Mr.prakash am not getting the link , kindly send that one ...... regards magesh
Magesh Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/4/2013 6:22 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Magesh Dear Mr.prakash am not getting the link , kindly send that one ...... regards magesh Hello, Sorry....please find the link /tf/WW/en/Posts/45570#top Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on