LUFP7 GSD

Hi,

somebody have LUFP7 GSD to step7?

------------------------------------------------------------------------------------------
Split from Using LUFP7 gateway.

Hi jdfp1683,

I would recommend you consult directly with the manufacturer of the module.

Hllo jdfp;

Schneider has a Profibus gsd file for the LUFP7 gateway, and has designated it as Tele071F.gsd.

All search links in the Schneider website for this file point to manuals, where it is stated that the file is available on the installation CDs of the gateway.

If you do not have access to these CDs, I know of 3 ways for you to get your hands on it:

1- contact Schneider support and request a copy of the gsd file, as suggested by Itafusna (the easiest way);

2- Wait and see if anybody on the forum has this file on their hard disk and is willing to share it (iffy, could take some time...);

3- Open the following Schneider document and look at section 8.2, it gives a printout of the contents of the gsd file.

https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=174331602A55.pdf&p_Doc_Ref=174331602A55&_ga=2.161448573.1120871277.1667398334-1363707969.1667398334

Copy the text marked in grey (there are 4 pages of it) inside a text file (use Notepad, for example) and save it as Tele071F.gsd (make sure you delete the .txt extension Note pad is designed to use, once you have saved it to your HDD). Then integrate the new Tele071F.gsd file in Step 7 to allow the use of a new gateway as a slave in your Profibus configuration.

Hope this helps,

Daniel Chartier