LWE Push Button behavior

I'm new to LWE and have not found an answer to my problem in the LWE forum. I'm sure its a simple issue and due my lack of experience with LWE.

After creating and down loading the attached LOGO comfort program and LWE v1.01  program to my LOGO v 8.3, I noticed that the push button did not remain green after it was activated and I see a rotating sand dial timer icon on my screen.

Icannot figure out how to fix it.

I would like the button to remain green when I activate it (turn on), and turn red when I deactivate it (turn off), without the rotating 

Please help me figure out what I'm doing wrong?

Thank you,

Denny

I don't know why you make a new topic.

As I wrote in the other topic:
What you want is not possible.

The variable V0.0 is linked to the push button. The push button is configured as a mouse click and therefore only outputs a short pulse. V0.0 is only at 1 signal for the duration of the pulse and thus the push button is only green for the duration of the pulse.

If you want a green display for the entire duration of the time, you must make your own display with Q1. Instead of the hourglass you have to choose the color green there.