Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
9 Entries
| 7/27/2011 1:08 PM | |
Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating:
|
Hi, If you put in revese direction, what happens? Did you try a master reset? What about the alarm and status? Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division- Technical Support & Hotline - Req. Suporte: www.siemens.com.br/Hotline/SRTel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com Homepage Brasil: www.siemens.com.br Portal de Suporte: www.siemens.com.br/Hotline |
|
If you have any further questions please don't hesitate to contact us. |
|
| 7/27/2011 1:23 PM | |
|
Posts: 122 Rating:
|
If I put parameter Flow directions as negative - the flow value is positive - the question is why ? . Didn't try master reset. No alarm met. |
| 7/27/2011 1:35 PM | |
|
Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating:
|
It's not normal. Can you send to me a MLFB of both parts? Ill check if have a problem. Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Support Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com |
|
If you have any further questions please don't hesitate to contact us. |
|
| 7/27/2011 1:58 PM | |
|
Posts: 122 Rating:
|
Suzuki_BR Excuse me what do you mean with MLFB ? |
| 7/27/2011 2:46 PM | |
|
Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating:
|
85 connected to 86 and 86 to 85 or 82 connected to 83 and 83 to 82 |
Last edited by: SUZUKI_BR at: 7/27/2011 2:50 PMLast edited by: SUZUKI_BR at: 7/27/2011 2:47 PMIf you have any further questions please don't hesitate to contact us. |
|
| 2/12/2015 9:34 AM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating:
|
|
Follow us on