Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Mag 5000 & Mag 5100

Created by: sharath_cv at: 6/28/2010 11:06 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/28/2010 11:06 AM	Rate (0)
sharath_cv Posts: 2 Rating: (0)	Dear All, As the calibration certificate given with the instrument is valid only for 1 Year, How to r calibrate or how to do the zero adjustment.
sharath_cv Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/22/2010 7:14 AM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	No, you can't get thezero adjustmentafter the flow meter installeda year . There is a sample as when you buya new car, the factory will offer the carspends9 litresofpetro per 100Kmbut actually after a few monthin useyour car will never getthat litmit.
	Last edited by: Chook at: 7/22/2010 7:15 AM [IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

10/28/2010 2:29 AM	Rate (0)
DavieS Posts: 64 Rating: (2)	The Siemens "Varificator" can be used to certify the original factory calibration with your meter. Your local Siemens representative should be able to provide this service.
DavieS Posts: 64 Rating: (2)
Suggestion To thank Quote Answer

11/3/2010 7:19 AM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Verification and Calibration these 2 things are difference.
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

9/1/2011 6:18 PM	Rate (0)
Manolo Posts: 4 Rating: (0)	The magnetic flowmeters become from factory with a calibration certificate, due that these flowmeters have not parts in moving like the turbine flowmeters it is not necesary to recalibrate this equipments every year. About the zero correction it is not necesary with this equipments because of the operatingfunction this is mede automaticalli. If you need to fullfill with the ISO 9000 and need to present a document to your evaluator we can provide you with a document obtained with our verificator equipment. The verificator is a equipment to check if the meter (TRANSMITTER,SENSOR )still keep the calibration conditions and because this verificator is calibrated in factory each year the document that you obtain is a certified report from factory. If you want this service do not doubt to contact the SIEMENS customer support and service department in your country.
Manolo Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on