Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MAG5000 & S7-1200 setting of digital output

Created by: jose_in at: 4/28/2021 9:37 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/28/2021 9:37 PM	Rate (0)
jose_in Advanced Member Joined: 4/9/2017 Last visit: 9/14/2023 Posts: 16 Rating: (0)	Good I have a mag5000 that I am now receiving the passive pulse output at a s7-1200 at about 200m. Now I have to move the flow meter to 3 km. With the 24 v dc that I am currently sending to the passive pulse output, will I be able to receive the confirmation in the s7 1200? I am going to wire it with 1.5 mm2 shielded cable. Or do I have to put something in between because of the long distance? Greetings. ------------------------------------------------------------------------------------------ Split from MAG5000 setting of digital output.
	Last edited by: Jen_Moderator at: 04/29/2021 09:43:03 Edited text for better reading. Last edited by: Jen_Moderator at: 04/29/2021 09:44:16 New subject after splitting
Suggestion To thank Quote Answer

5/21/2021 10:37 AM	Rate (0)
Fl0w Regular Member Joined: 12/11/2012 Last visit: 6/7/2023 Posts: 34 Rating: (10)	That depends on the max frequency your pulses will reach and the cable capacitance. The cable resistance can be almost neglected for 1.5mm² wires (~36ohm).

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on