Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Mag6000 Profibus changing units

Created by: rico100 at: 8/16/2011 5:10 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

8/16/2011 5:10 PM	Rate (0)
rico100 Experienced Member Joined: 10/14/2010 Last visit: 11/13/2024 Posts: 59 Rating: (3)	Hi all, I've connected 5 mag6000 flow controllers over Profibus. Everything is working fine, except I can't seem to work out how to change the units of the flow rate and totalisers. Is this only possible with the PDM software? Thanks Rich
	Last edited by: rico100 at: 8/16/2011 5:11 PM
Suggestion To thank Quote Answer

8/16/2011 5:28 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	Profibus PA or DP?? Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Hotline Req. Suporte: www.siemens.com.br/Hotline/SR Tel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/16/2011 5:36 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	I saw in manual, that values are default and cant changed. Page 17 4.5.3 Configuration module formats SITRANS F Communication Module PROFIBUS PA/DP Profile 3 for transmitter types SITRANS F M MAG 5000/6000 and SITRANS F C MASS 6000 http://support.automation.siemens.com/BR/view/en/22437482 Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Hotline Req. Suporte: www.siemens.com.br/Hotline/SR Tel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com Attachment Profinus.JPG (220 Downloads)
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/16/2011 5:45 PM	Rate (0)
rico100 Experienced Member Joined: 10/14/2010 Last visit: 11/13/2024 Posts: 59 Rating: (3)	Hi, Thanks for the reply, yes I did did see the default units, can't see anywhere where it says it can't be changed though? On Pg22 there is a creenshot of the PDM software where it looks like you can change the units? Just wondered whether there are any other ways? Also the default value for Totaliser 1 appears to be l for me not m3? Flowmeters on a Profibus DP network. Thanks again

Suggestion To thank Quote Answer

8/16/2011 7:10 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	It's possible by PDM or Display. Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Hotline Req. Suporte: www.siemens.com.br/Hotline/SR Tel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/16/2011 7:11 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	Appears L on display? Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Hotline Req. Suporte: www.siemens.com.br/Hotline/SR Tel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/16/2011 9:05 PM	Rate (0)
rico100 Experienced Member Joined: 10/14/2010 Last visit: 11/13/2024 Posts: 59 Rating: (3)	Changing the units for the value on the screen doesn't change the units for the Profibus module.

Suggestion To thank Quote Answer

8/18/2011 12:47 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	ok, well in profibus is not possible to change.
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on