Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MAGAZINE ROTATING BY SERVO VALVE

Created by: Y.DHINAKARAN at: 6/29/2010 6:18 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/29/2010 6:18 AM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	Hi, Iam using 840D PCU50 with S7 300. Iam new to using Magazine with ATC, The magazine is rotating by servo valve feedback with encoder. Please share the techniques as well as useful datas. Y.Dhinakaran.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

6/29/2010 7:46 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Y.DHINAKARAN Hi, Iam using 840D PCU50 with S7 300. Iam new to using Magazine with ATC, The magazine is rotating by servo valve feedback with encoder. Please share the techniques as well as useful datas. Y.Dhinakaran. Hi Dhinakaran, We have Pegard make 6 axis HMC (840Di with PCU 50) with ATC. As far as I know your system s/w should haveATC featuer, please check & confirm with Siemens. Please see the attachement it may help you. DEEP. Attachment ATC management.pdf (128 Downloads)

Suggestion To thank Quote Answer

7/1/2010 11:32 AM	Rate (0)
Y.DHINAKARAN Posts: 43 Rating: (2)	hi, I studied the manual but i need some sample projects to learn more things. Y.Dhinakaran.
Y.DHINAKARAN Posts: 43 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on