Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

make a "logout" the user

Created by: rdoliveira at: 7/16/2016 4:16 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

7/16/2016 4:16 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 12/5/2023 Posts: 1437 Rating: (143)	I am using a IPC677D with the "TIA V13 SP1 upd8 Professional". I would like to make a "logout" the user, there is a wooden do this without using the logout button, and without using the pre set time? It could be done by scripts? thank you. Attachment logout.jpg (133 Downloads)
	Last edited by: rdoliveira at: 7/16/2016 4:17:28 PM "Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

7/18/2016 7:55 AM	Rate (1)
bg2492 Diamond Member Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2122)	Hello rdoliveira, you can use the ODK-function "PWRTLogout" in a C-script. This works with WinCC Classic V7.x and with TIA V13 Professional too. Regards Georg Berghof Attachment PWRT_Logout.jpg (732 Downloads)
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

7/18/2016 1:52 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 12/5/2023 Posts: 1437 Rating: (143)	Perfect, that's right. Thank you.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof System functions/Scripting

Follow us on