Making F-GROUPS

Hey all :)

The problem is as follow:

I had installed the 414-4h cpu with all the necessary configurations in the in the hw config for fail safe mode but yet I’ not able to create a f groups for rtg and stg, if some1 can give me pointers to make it.

This is my last resort plz if some1 can help me I will appreciate it a lot.

let me summarize, what is neccecary for a failsafe-program with F-Systems:

• create the HW-configuration and set the 'CPU contains safety program'-checkbox in the CPU-properties
• create a new CFC-chart. CFC (>= V7.0, I think) will create a new runtimegroup for this chart.
  
• Move blocks from the 'S7 F Systems Lib V1_3'\F-User blocks\Blocks to this chart
• Compile the program
  

• HW-configuration as said before
• Create a FB/FC with language F-LAD or F-FBD and program you F-program in this block (calling other blocks with language F-LAD/F-FBD is possible). This block mustn't have IN/OUT/INOUT-params!
  
• Create a FC with language F-CALL and double-click it
• Define the F-runtime group (F-call-block is the block you opened, F-program block is the main safety block, you programmed just before). If the F-programblock is an FB, define a new IDB.
• Compile and download the safety-program.

• 319F (6ES7 318-3FL00-0AB0)
• 317F (6ES7 317-6FF0?-0AB0 / 6ES7 317-2FJ10-0AB0 / 6ES7 317-2FK13-0AB0)
  
• 315F (6ES7 315-6FF01-0AB0 / 6ES7 315-2FH1?-0AB0)
  
• IM151 F-CPU (6ES7 151-7FA??-0AB0)