Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

manual to program a WF723 card in the step 5 program

Created by: Mr. Eduardo at: 4/17/2012 10:12 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/17/2012 10:12 PM	Rate (0)
Mr. Eduardo Member Joined: 4/17/2012 Last visit: 3/5/2023 Posts: 1 Rating: (0)	Hello! I´m looking for the manual that can explain how to program the wf723 in the step 5 software. I have this sample program here to show you what exactly i want. C DB 210 DB-WF card nr.1 L KH 0000 reset FW T FW 198 T DL 27 DL 27 axe 1 step 1 L KH 0010 Loading manual mode T DL 26 in DL 26 axe 1 step 1 It´s a little part of the machine program. Can you send me the manual that explain how to program each DW from the WF 723 card in the step 5 program? Can you explain how to program the WF 723 card? How to initialize the card, how to load and clear a program in WF. How to load machine data card. How to synchronize the card. Best regards, Eduardo

Suggestion To thank Quote Answer

4/18/2012 6:31 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	https://support.automation.siemens.com/WW/llisapi.dll?query=WF723&func=cslib.cssearch&content=adsearch%2Fadsearch.aspx%3Ftab%3D2&lang=en&siteid=csius&objaction=cssearch&searchinprim=_searchinprim_&nodeid=99&x=16&y=8&cssearchengine=NEW&x=0&y=0

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on