Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MAS 21: How to establish GPRS connection between MICRO CS and S200?

Created by: Mamamija at: 11/17/2009 8:06 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/17/2009 8:06 AM	Rate (0)
Mamamija Posts: 16 Rating: (0)	He!! I have question Have you established GPRS connectionbetween MICRO CS and S200? How did you managed it? Did you usePort Forwardingover router??
Mamamija Posts: 16 Rating: (0)	Last edited by: O_Moderator at: 4/14/2010 1:56 PM subject edited Last edited by: O_Moderator at: 11/17/2009 2:11 PM new subject after splitting from /tf/WW/en/Posts/37015#top
Suggestion To thank Quote Answer

11/17/2009 8:31 AM	Rate (0)
Gujzer Posts: 20 Rating: (0)	Yes GPRS works fine over SINAUT MICRO SC. Yes I had to set the router to forward port. Also be sure to have your APN settings right in data block. Also the IP_Adress for WDC_Init block should mach with this IP: [link]http://www.ip-adress.com/[/link] If you don't have a static IP, then I can't help you. I only know it has something to do with DNS.
Gujzer Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

11/17/2009 10:24 AM	Rate (0)
Mamamija Posts: 16 Rating: (0)	How did you forwarded the port number over router?? Because I don't get any C light or connection with MICRO CS
Mamamija Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

11/17/2009 10:49 AM	Rate (0)
Gujzer Posts: 20 Rating: (0)	You need to know your IP of your local PC in the one you have MICRO SC running (something like: 192.168.xxx.xxx). If you use windows you can find this ip in Local area connection status (right click on icon in taskbar -> select status) under support tab you see 3 IP numbers. Use the default gateway adress to enter the router with your internet browser (you will need username and password for router). And use IP adress to open a port in router. You will find these settings in router under User-defined virtual servers, or something like that, look in the router manual. I hope you understand me, I usualy complicate a lot. [schnippschnapp]
Gujzer Posts: 20 Rating: (0)	Last edited by: O_Moderator at: 11/17/2009 2:12 PM Last edited by: Gujzer at: 11/17/2009 10:51 AM
Suggestion To thank Quote Answer

11/19/2009 1:52 PM	Rate (0)
Robster Gold Member Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Mamamija He!! I have question Have you established GPRS connectionbetween MICRO CS and S200? How did you managed it? Did you usePort Forwardingover router?? How to do this is described very detailted in here: [url]http://support.automation.siemens.com/WW/view/en/22537809[/url]

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on