Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MAS 5: TC65 Firmware update problems V1.xxx to V3.xxx

Created by: mimdalli at: 7/29/2009 10:29 AM (8 Replies)

Rating (1)

Thanks 0

9 Entries

7/29/2009 10:29 AM	Rate (0)
mimdalli Posts: 2 Rating: (0)	Yes, AT^SCFGExtended Configuration Settings You can also define in autoexec configuration. I advice you to read the REV3 At Command set documentation and Java documentation of TC65, (Only rev3 certainly) Search the word "watchdog" in these documents, and you get it. But now, I have a problem with a modem which firmware is 1.030 it says every time "ERROR: unexpected or fatal response (0x03) to block 3." when I try to upgrade to rev3. Any idea??
mimdalli Posts: 2 Rating: (0)	Last edited by: O_Moderator at: 4/14/2010 12:46 PM subject edited Last edited by: CS Moderator at: 8/31/2009 12:01 PM new subject after splitting
Suggestion To thank Quote Answer

8/20/2009 4:16 PM	Rate (0)
Lucas Cuminato Posts: 3 Rating: (0)	Im having the same problem: ERROR: fatal response (0x03) to block 4, possible version conflict. Any ideas?????
Lucas Cuminato Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/28/2009 9:05 AM	Rate (1)
Lifrasil Bronze Member Joined: 9/29/2005 Last visit: 12/16/2024 Posts: 313 Rating: (24)	Dear guys, i found a list where the FW update possibilities are described. (Release 1) FW 01.041 to (Release 2) FW 02.000 <-- not possible (Release 2) FW 02.000 to (Release 2.8) FW 02.800 <-- possible (Release 2.8) FW 02.800 to (Release 3.0) FW 03.000 <-- possible So as you see, your FW update is simple not possible Ehm.... I think you should contact your local distributor to make an exchange-deal or something like that. ~~Note: Furthermore i think about the circumstance that you cannot update from Release 2 directly to Release 3. You have to go there via Release 2.8.~~ regards Edit 16.09.09: My note was not correct
	Last edited by: Lifrasil at: 9/16/2009 3:58 PM
Suggestion To thank Quote Answer

9/9/2009 2:46 PM	Rate (0)
Lucas Cuminato Posts: 3 Rating: (0)	Lifrasil Dear guys, i found a list where the FW update possibilities are described. (Release 1) FW 01.041 to (Release 2) FW 02.000 <-- not possible (Release 2) FW 02.000 to (Release 2.8) FW 02.800 <-- possible (Release 2.8) FW 02.800 to (Release 3.0) FW 03.000 <-- possible So as you see, your FW update is simple not possible Ehm.... I think you should contact your local distributor to make an exchange-deal or something like that. Note: Furthermore i think about the circumstance that you cannot update from Release 2 directly to Release 3. You have to go there via Release 2.8. regards Hi Lifrasil, thanks for your help, but do you know where I can find the FW 02.800 for download? I have already searched google but didnt find anything.... Thanks again, Lucas.
Lucas Cuminato Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/16/2009 3:52 PM	Rate (0)
Lifrasil Bronze Member Joined: 9/29/2005 Last visit: 12/16/2024 Posts: 313 Rating: (24)	Hi Lucas, you don´t need it. You can update directly to V03.000. Otherwise please inform me, i will try to get the file. But my buddy is not reachable until next week. regards
	Last edited by: Lifrasil at: 9/16/2009 3:59 PM
Suggestion To thank Quote Answer

9/29/2009 8:31 PM	Rate (0)
Lucas Cuminato Posts: 3 Rating: (0)	Lifrasil Hi Lucas, you don´t need it. You can update directly to V03.000. Otherwise please inform me, i will try to get the file. But my buddy is not reachable until next week. regards Hi Lifrasil, i had already tried to update directly to v03 but without sucess. Im still having the same error as before. I think I have to go through v2.8 as you said. Thanks for your help. Lucas
Lucas Cuminato Posts: 3 Rating: (0)	Last edited by: Lucas Cuminato at: 9/30/2009 2:14 PM Last edited by: Lucas Cuminato at: 9/29/2009 8:35 PM
Suggestion To thank Quote Answer

9/30/2009 11:18 AM	Rate (0)
DerekR Posts: 3 Rating: (0)	Hi Lifrasil could you indicate where you saw the list of possible update routes? It's not that I don't believe you, it's just that I want something to hit my supplier over the head with. I have 32 TC65 all at either FW revision 1.030 or 1.041 and a customer that wants at least a revision 2.0 FW. Thanks in advance Derek
DerekR Posts: 3 Rating: (0)	Last edited by: DerekR at: 9/30/2009 11:29 AM
Suggestion To thank Quote Answer

9/16/2010 3:54 AM	Rate (0)
Souza Fabio Posts: 2 Rating: (0)	Hi Lifrasil There is no way to upgrade to version 01041 to a higher version?
Souza Fabio Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/2/2013 7:37 PM	Rate (0)
5eth Posts: 1 Rating: (0)	Hello people! Can anyone provide me with firmware for TC65 rev 2800? Thanks in advance.
5eth Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on