ChristophD

Hello,

which faultnumber you will mask out?

Configuring messages

The properties of the faults and alarms in the drive system are permanently defined.

The following can be configured for some of the messages within a permanently defined

framework for the drive system:

Change message type (example)

Select message Set message type

p2118[5] = 1001 p2119[5] = 1: Fault (F)

= 2: Alarm (A)

= 3: No message (N)

Regards
Christoph

 Sir,

i want to mask the following faults F01625 & F30625 both are sign off error fault. can u explain it

------------------------------------------------------------------------------------------
Split from mask out alarms and faults.

 Sir,

  Please explain any one fault how to mask it.what are the value to set in parameter P2118 &P2119.

ChristophD

Hello,

this are Safety faults and can't be masked out !

Regards

Christoph

If e.g. F01054 CU : System limit exceeded needs to be change to alarm message then set parameters as below.

Set P2100[0] =01054

Set P2101[0] = 0

Set P2118[0] = 01054

Set P2119[0] = 1

In our example, fault message is defined as alarm message & action defined is none, so acknowledgement not required.  (i.e. P2126 & p2127 does not come into picture)

HTH.