Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Mathmatical function in OBA8

Created by: Paul CES at: 9/25/2014 9:53 PM (4 Replies)

Rating (1)

Thanks 1

5 Entries

9/25/2014 9:53 PM	Rate (0)
Paul CES Posts: 11 Rating: (0)	I am building a RPM display in OBA7 there is a function in the mathmatical tool to reference other parts of the prpgram to allow multiplication of other data. in OBA8 this reference tool is not available in the mathmatical function any ideas why not?
Paul CES Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

9/25/2014 10:21 PM	Rate (1)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/27/2023 Posts: 1192 Rating: (112)	Just below the (mathematical)blok you wil find a litte symbol with an + in it. Klik with your mouse on it and ...... On the same way you make the normal electrical connections you can make reference connections. When your ready, Click on the little - symbol below the block and the reference lines are away, but they stay exist. There is a symbol on your workspace to show ore hide the reference lines. P.S. Ik have some time exand to find it out. Sorry for my bad englisch

Suggestion To thank Quote Answer

9/25/2014 10:30 PM	Rate (0)
Paul CES Posts: 11 Rating: (0)	ok that works thanks enlish was fine
Paul CES Posts: 11 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

1/5/2015 4:06 PM	Rate (0)
biancavy Posts: 15 Rating: (0)	I have no idea who came up with this, easy once you know it but i just spend an hour looking for a reason whythanx !
biancavy Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/17/2016 12:17 AM	Rate (0)
Dinos Posts: 124 Rating: (13)	Bianca, Take a look on this page: https://support.industry.siemens.com/cs/document/109471094/how-can-you-configure-references-between-blocks-in-logo!-8?dti=0&lc=en-WW
Dinos Posts: 124 Rating: (13)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on