Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Maximum PLC connections with Simatic net and iFix (Scada)

Created by: SV1787 at: 2/3/2009 9:52 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/3/2009 9:52 PM	Rate (0)
SV1787 Posts: 2 Rating: (0)	Does somebody know what the maximum PLC connections are with Simatic Net in combination with a Scada server iFix 4.5? Thanks beforehand, Sven Van Ingelgom
SV1787 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/5/2009 11:08 AM	Rate (0)
J_Bell Posts: 5822 Rating: (411)	Dear Sven, as far as I know uses IFix usually S7-Connections to connect to the S7-PLC. As we accept this the limitation is based upon two points. 1. The number of S7-Connections available in the S7-PLC 2. The number of S7-Connections useable with the SIMATIC NET driver you use. So if we know what you use more can be said. Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on