Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Maxium sumultaneous connections in OPC

Created by: kasun at: 3/26/2008 5:07 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/26/2008 5:07 AM	Rate (0)
kasun Posts: 28 Rating: (1)	Hi, Can anybody tell me what is the maximum number of connections to PLC s that can be achieved through OPC server with single license. Thank you
kasun Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

3/26/2008 9:50 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, depending on the driver you use the maximum Number of Connections is tested with the OPC Server. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

3/26/2008 10:43 AM	Rate (0)
kasun Posts: 28 Rating: (1)	Hi , What do you mean by the driver?
kasun Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

3/26/2008 11:00 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hi, the OPC Server is only part of the driver you want to use... e.g. if you have SOFTNET S7 Lean than you have up to 8 Connections... for SOFTNET S7 Advanced than you have up to 64 Connections... a.s.o. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

3/26/2008 11:08 AM	Rate (0)
kasun Posts: 28 Rating: (1)	Thanks a lot
kasun Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on