Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MC 411 fault

Created by: HUSAM38 at: 7/3/2019 10:41 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

7/3/2019 10:41 AM	Rate (0)
HUSAM38 Member Joined: 12/28/2018 Last visit: 5/1/2024 Posts: 2 Rating: (0)	hi is there any solution about external encoder MC 411 fault number ------------------------------------------------------------------------------------------ Split from Technology Object External Encoder Problem.
	Last edited by: Jen_Moderator at: 07/03/2019 11:41:50 New subject after splitting
Suggestion To thank Quote Answer

7/3/2019 11:40 AM	Rate (0)
HUSAM38 Member Joined: 12/28/2018 Last visit: 5/1/2024 Posts: 2 Rating: (0)	hi I use ttl encoder for external encoder and pos ınput1 modül everything is green and ok but plc gives MC 411 fault anyone solution please

Suggestion To thank Quote Answer

7/4/2019 12:32 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, check the diagnostic buffer . Description: Page 639: Technology alarm 411 https://support.industry.siemens.com/cs/ww/en/view/109749263
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

4/5/2024 7:50 AM	Rate (0)
Detisuen Joined: 3/9/2023 Last visit: 6/7/2024 Posts: 27 Rating: (1)	This is just a quick note for me and all. I also had similar problem as continuously receiving MC411 followed with MC431. No matter what i tried like replacing the encoder with a new one, changing the encoder, replacing the encoder cable...etc. All tries ended up unsuccesfully. Then, I made a complete download of an earlier backup of PLC program and success! The problem vanished! Attachment MC411.PNG (411 Downloads)
	good day to be alive, sir, good day to be alive he said..
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

4/5/2024 7:50 AM	Rate (0)
Detisuen Joined: 3/9/2023 Last visit: 6/7/2024 Posts: 27 Rating: (1)	Attachment MC431.PNG (299 Downloads)
	good day to be alive, sir, good day to be alive he said..
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on