Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MC_SetSensor

Created by: dltjdud at: 2/2/2021 7:46 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/2/2021 7:46 AM	Rate (0)
dltjdud Regular Member Joined: 5/27/2020 Last visit: 10/6/2022 Posts: 5 Rating: (0)	Hello I want to configure the program using MC_SetSensor. But it's hard because there's no explanation for MC_SetSensor. Does the explanation of Mode 1 of MC_SetSensor provided by Siemens mean the same as Mode 1 in the picture I attached? Is there a document that details the mode of MC_SetSensor? (Mode 1: Switch over encoder without aligning the actual position Note When closed loop position control is active, an additional difference of the two encoders acts as additional control deviation and can trigger a compensating motion. ) Attachment MC_SetSensor mode1.jpg (90 Downloads)

Suggestion To thank Quote Answer

2/2/2021 8:20 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/26/2023 Posts: 5400 Rating: (727)	Hello please find application example https://support.industry.siemens.com/cs/ww/en/view/109743134
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

2/2/2021 8:30 AM	Rate (0)
Mister T Silver Expert Joined: 4/28/2015 Last visit: 1/25/2023 Posts: 385 Rating: (49)	Hello, please have a look at this... SIMATIC S7-1500 S7-1500/S7-1500T Axis functions V5.0 in TIA Portal V16 (12/2019) https://support.industry.siemens.com/cs/ww/en/view/109766462 see chapter 7.10 And for detailed information, see... SIMATIC S7-1500(T): Control structure of a technology object "Axis" in a SIMATIC S7-1500 or S7-1500T https://support.industry.siemens.com/cs/ww/en/view/109770664

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC Motion Control

Follow us on