MCP486 with 840DI problem!!!

im commissioning the cnc 840di, everything is working so far but i cannot get the mcp working... i went through the manual and it seems that i need an example project from where i have to extract a bunch of files (and a system file SDB210).. the things is that the example project is called MCP840DI.ZIP and i cant find it anywhere!!!!

please! if someone has this file, please share it with me :D!

thanks a lot to everyone

Franco

so the thing is that the 840di does not detect the MCP, i double checked the dip switch settings and everything seems to be correct, i configured the OB100 with the correct address but still nothing, all the leds flash nonstop...

so i went through the manual and it looks like im missing a system data file called SDB210 and the manual says it located on an example project called MCP840DI but i cannot find it..

anyhow if you have a solution to my problem it will be appreciated. the ob100 is the one that comes by default with the example project (1.5mbps, mpiaddr 6, cycletimout 200ms, etc,etc,etc...)

thanks again!

I already found and solved the problem. The solution was:

i was using toolbox 7.4.3 and the NCU version was 6.3.x so i just ask siemens for the right toolbox and they gave me the version 6,4,x just for me to try what happens... it worked out of the box :D!

thanks again, i hope someone found this solution helpful