Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MCPA IN / OUT

Created by: hookipa at: 10/6/2011 7:58 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

10/6/2011 7:58 AM	Rate (0)
hookipa Posts: 67 Rating: (0)	Hello, I m using a 802D SL plus with MCPA, ADI4 and 1 PP72/48 for a VMC retrofit. On the PP72 my output are Q0.0 to Q3.7 but how to address MCPA fast output in PL7 ? Thanks for your help. Patrice
hookipa Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

10/6/2011 5:09 PM	Rate (0)
GOTHIC HERO Regular Member Joined: 9/30/2011 Last visit: 6/20/2021 Posts: 28 Rating: (0)	sorry, I don't understand "PL7",you mean is PLC?

Suggestion To thank Quote Answer

10/6/2011 5:36 PM	Rate (0)
hookipa Posts: 67 Rating: (0)	Thanks for your answer. Your wright, my problem is with PLC.I can't reach to work with MCPAInput / output. I tried to call V28000004.0 to turn on Output 1 But I get a PLC STOP error and I don't know why. If you have an idea it will help me. Patrice
hookipa Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

10/6/2011 5:51 PM	Rate (0)
GOTHIC HERO Regular Member Joined: 9/30/2011 Last visit: 6/20/2021 Posts: 28 Rating: (0)	Terminal X1020 is FAST INPUT, from $A_IN[9] to $A_IN[16],PLC address from V29001000.0 to V29001000.7; Terminal X1021 is FAST OUTPUT, from $A_OUT[9] to $A_OUT[16], PLC address from V29001004.0.You also need set the parameters 10350,10360,10366,10368

Suggestion To thank Quote Answer

10/6/2011 5:55 PM	Rate (0)
GOTHIC HERO Regular Member Joined: 9/30/2011 Last visit: 6/20/2021 Posts: 28 Rating: (0)	GOTHIC HERO Terminal X1020 is FAST INPUT, from $A_IN[9] to $A_IN[16],PLC address from V29001000.0 to V29001000.7; Terminal X1021 is FAST OUTPUT, from $A_OUT[9] to $A_OUT[16], PLC address from V29001004.0.You also need set the parameters 10350,10360,10366,10368 IF you need set the FAST OUTPUT to 1,you can use the address V28001009and V28001010 Attachment untitled.jpg (111 Downloads)
	Last edited by: GOTHIC HERO at: 10/6/2011 6:00 PM
Suggestion To thank Quote Answer

10/7/2011 8:22 AM	Rate (0)
hookipa Posts: 67 Rating: (0)	Thanks for your help but it doesn't work. I think my error is on the MD. I want fast IO on my MCPA card and I have : MD10350=2 MD10360=2 MD10366=10101H MD10368=10101H I don't understant how MD10366 and 10368 works then I put default values. Patrice
hookipa Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

10/7/2011 9:37 AM	Rate (0)
hookipa Posts: 67 Rating: (0)	Gothic hero, I tried in a blank PLC program exactly what you sent me in untitled.jpg and it work great.If I understand, I need to have V28001010.0 AND V28001009.0 to turn on my first fast output ? Thanks for your help and your interresting reply, Patrice
hookipa Posts: 67 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on