Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MEMORY CARD S7-300

Created by: FRANCK HERVE at: 7/28/2015 10:42 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/28/2015 10:42 AM	Rate (0)
FRANCK HERVE Bronze Member Joined: 2/10/2015 Last visit: 9/16/2023 Posts: 270 Rating: (1)	Hi everybody I have a concern, I wanted to know how to see the capacity of a memory card that is inserted in an S7-300 CPU in the SIMATIC Manager software to help me thank you and good day to tous.que toujour God hold you in his arms tuck happiness.

Suggestion To thank Quote Answer

7/28/2015 11:05 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 6/21/2023 Posts: 4617 Rating: (701)	franckaay roy Hi everybody I have a concern, I wanted to know how to see the capacity of a memory card that is inserted in an S7-300 CPU in the SIMATIC Manager software to help methank you and good day to tous.que toujour God hold you in his arms tuck happiness. Hello With this you can read the serial number of the Memory Card: How can you read out the identification data (the serial number of the MMC, for example) with the SFC 51 in STEP 7 V5.5?

Suggestion To thank Quote Answer

7/28/2015 11:17 AM	Rate (0)
Kampi Posts: 366 Rating: (30)	you can also check the actual used memory when you mark "Blocks" in the tree on the left in Simatic Manager -> press right mousebutton -> PLC -> Module information. Then on "Memory". nice regards
Kampi Posts: 366 Rating: (30)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on