Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

memory card to backup/recover program and use in 2nd LOGO 0ba8

Created by: _Amper_CZ_ at: 2/10/2015 8:42 AM (3 Replies)

Rating (2)

Thanks 2

4 Entries

2/10/2015 8:42 AM	Rate (0)
_Amper_CZ_ Posts: 30 Rating: (0)	Hi, I have a question, is it possible to use memory card to backup/recover program (with parameters) and use it in 2nd LOGO 0ba8? (duplicating tested program, etc.) ---------- Split from LOGO 0BA7 memory SD card.
_Amper_CZ_ Posts: 30 Rating: (0)	Last edited by: Min_Moderator at: 2/10/2015 4:16:39 PM New subject after splitting
Suggestion To thank Quote Answer

2/10/2015 8:47 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/10/2024 Posts: 34385 Rating: (4285)	You post in a Topic of Logo 0BA7. Want you sd-card from 0BA7 to 0BA8 or from 0BA8 to 0BA8?

Suggestion To thank Quote Answer

2/11/2015 12:06 PM	Rate (0)
_Amper_CZ_ Posts: 30 Rating: (0)	I'm sorry for this confusion, I haven't noticed it's about 0ba7 only... I ment transfer/copy program between same types 0ba8 to 0ba8 or 0ba7 to 0ba7... Thanks for respond
_Amper_CZ_ Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

2/17/2015 2:02 PM	Rate (2)
Helmut_13 Posts: 2930 Rating: (432)	Yes, You can copy the program from one LOGO! to onother one if the same Card is supported. Means SD-Card between LOGO! 7 or MSD-Card between LOGO!8. If you want to copy a program from a LOGO! 7 to LOGO! 8 then this will not work because of different FW. Workaround: + Copy the program from LOGO! 7 to SD-Card + Pluggin this SD-Card to PC + Open the Program on the Card with LSC V8 + Change LOGO! HW to LOGO! 8 + Store the file to a MSD-Card by using the same file Name (LOGO_U_P.bin) + Pluggin the MSD-Card to LOGO! 8 and Switch Power ON It can also be used in the oposit way, but you may have to modify the program if functions are used not supported by a LOGO! 7. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)	Last edited by: Helmut_13 at: 2/17/2015 2:03:24 PM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users _Amper_CZ_ RoberGC

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on