Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Menu tree.

Created by: zars at: 11/22/2016 9:05 PM (4 Replies)

Rating (1)

Thanks 1

5 Entries

11/22/2016 9:05 PM	Rate (0)
zars Posts: 6 Rating: (0)	Hello. I am siting at this few evenings already, and cannot make anything usable. What i would like achieve is, to make a menu, where with up/down buttons i could select 110v / 240v / 24v. And then with left/right buttons i could switch between 4 wire / 6 wire / direct wired options on each of them. And it would come on to the screen as " 240v 4 wire" and engage two outputs. One corresponding 240v one and another for 4 wire. If someone could give me an idea, how to do that . Making outputs to work is not a problem, just a menu is mystery for me. My last attempt is absolute mess. Thank you. Attachment menu.jpg (79 Downloads)
zars Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/22/2016 9:25 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/6/2023 Posts: 31561 Rating: (3922)	For which LOGO!?

Suggestion To thank Quote Answer

11/22/2016 10:25 PM	Rate (0)
zars Posts: 6 Rating: (0)	Sorry, 0ba4.
zars Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/23/2016 6:55 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/6/2023 Posts: 31561 Rating: (3922)	Here is a possible solution. Attachment Menu.zip (80 Downloads)

Suggestion To thank Quote Answer

11/23/2016 6:16 PM	Rate (0)
zars Posts: 6 Rating: (0)	Thank you so much. This is so great.
zars Posts: 6 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on