Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Message Display on 0BA6 using Ladder

Created by: HansAST at: 2/19/2010 2:52 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

2/19/2010 2:52 PM	Rate (0)
HansAST Experienced Member Joined: 5/24/2009 Last visit: 10/20/2024 Posts: 90 Rating: (3)	Hi, It seems that the message function in Ladder mode doesn't work?? I get the error that output Q is not connected, but the ladder editor doesn't give me one.. (Although the help shows it...) It does work in simulation mode, it fails the download... Is this a known problem???

Suggestion To thank Quote Answer

2/19/2010 4:23 PM	Rate (1)
Fux Posts: 661 Rating: (123)	Yes, this known... And already often asked here. Call the message text again (make contact)and connect a relay coil behind (not as output but as "open connector").
Fux Posts: 661 Rating: (123)	Last edited by: Fux at: 2/19/2010 4:24 PM
Suggestion To thank Quote Answer

2/22/2010 10:39 AM	Rate (0)
HansAST Experienced Member Joined: 5/24/2009 Last visit: 10/20/2024 Posts: 90 Rating: (3)	Thanks for your reply. I may be missing something, but how do I do that? I cannot connect any contact to it... Open or normal... And what do you mean with call the message 'again'... In FBD adding a connection to a coil is not an issue and works fine... Must be so simple that I do not see it.. :-( Correction: I see it now. I have added a new ladder with the message as an open contact and connected it to a coil... Now it loads... Thanks for the directions!!
	Last edited by: HansAST at: 2/22/2010 10:43 AM
Suggestion To thank Quote Answer

2/25/2010 10:57 AM	Rate (0)
LOGO!Barbarian Posts: 173 Rating: (95)	Hi all See this link! This is the most often asked question of all users all over the world.... "why does it work in simulation but will not download and I get the error message that the messgae text is missing an output" /tf/WW/en/Posts/40730#top Aaaaaarrrrrgggghh!
LOGO!Barbarian Posts: 173 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on