Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

migrate a WinCC Flex 2008 project to portal

Created by: cbcX at: 12/7/2012 5:53 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/7/2012 5:53 PM	Rate (0)
cbcX Posts: 43 Rating: (0)	I also am trying to migrate a WinCC Flex 2008 project to portal.I hit the MIgrate button on the portal menu, and browse to the flex project and get it all filled out, when I hit MIgrate, portal pops up a window that says " 0% Exporting project Data..." and sits there forever doing nothing. The remaining time in seconds = ?. Even the 'Cancel' button does nothing... any ideas?? At this point I have to shut down Portal from the Windows Task Manager.
cbcX Posts: 43 Rating: (0)	Last edited by: O_Moderator at: 12/10/2012 11:37 AM new subject after splitting from /tf/WW/en/Posts/37216#top
Suggestion To thank Quote Answer

12/10/2012 12:30 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Which entries are available in the internet concerning migration to STEP 7 V11 and WinCC V11 (TIA Portal)? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on