Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

migrate Step7 V5.5 to V11

Created by: RobyTelmotor at: 6/24/2011 12:25 PM (5 Replies)

Rating (1)

Thanks 0

6 Entries

6/24/2011 12:25 PM	Rate (0)
RobyTelmotor Posts: 5 Rating: (0)	I have a problem, When I convert a software written for a S7300 with Step7 V5.5 to V11, I get an error of conversion (jpg attached) and I do not complete the conversion. How can I fix it? thank you very much P.S. sorry for my English.
RobyTelmotor Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/24/2011 1:32 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello Roby, Please translate the messages in Engish in order to be easier and understandable for all memebrs. Special characters are not allowed in data type "..." Special characters are not allowed in data type "..." Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

6/24/2011 2:05 PM	Rate (0)
RobyTelmotor Posts: 5 Rating: (0)	Ok, sorry! Attachment migration log file.jpg (756 Downloads)
RobyTelmotor Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/24/2011 2:55 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/17/2025 Posts: 15541 Rating: (2465)	In your original program, find the data type "a" shown in the error screen capture. Rename all components of the data type so none of the names use other than A-Z, a-z, 0-9, -, _ and see if it converts. After it is converted to V11, set the language for the project, convert your data type "a" components back to what they were, and recompile all. Hope that helps.
	science guy
Suggestion To thank Quote Answer

6/24/2011 4:14 PM	Rate (0)
RobyTelmotor Posts: 5 Rating: (0)	Inmy original program does notexistthe data type "a" or "libero"...
RobyTelmotor Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

6/24/2011 5:16 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/17/2025 Posts: 15541 Rating: (2465)	Maybe you can try changing the default language to English, migrate the project to V11, then change the language of the migrated project? I saw where others had problems migrating due to language related problems. Hopefully update 3 will correct those problems!
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on