Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Migrate Tia Portal to Simatic s7

Created by: Micheal at: 12/1/2014 7:45 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/1/2014 7:45 PM	Rate (0)
Micheal Posts: 2 Rating: (0)	Hi guys.I want migrate from TİA portal v12 or v11 to SİMATİC S7 v5.5.?How can i do that.?Is it possible.?. I thank you.....
Micheal Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/1/2014 7:58 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	Micheal Hi guys.I want migrate from TİA portal v12 or v11 to SİMATİC S7 v5.5.?How can i do that.?Is it possible.?. I thank you..... If you can right click on each specific item, like OB, FB, FC, DB, you may be able to copy as text, and paste into source files to import into your legacy step 7 project. You will have a lot of manual work setting up your addressing because of the differences unless you make your entire portal project absolute addressing first. I think you can open both portal and legacy step 7 at the same time, preferably on two monitors, and recreate the code or even copy SCL/STL directly allowing for the occasional error with the differences in symbolic and absolute addresses. If you find out someone wrote a tool, please post details. If anyone would know, it would be smiffy...
	science guy
Suggestion To thank Quote Answer

12/3/2014 7:58 AM	Rate (0)
Micheal Posts: 2 Rating: (0)	I Thank you for explain and help.I am writing again all over in SIMATIC 7.Again thank you....
Micheal Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on