Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Migration from 5.5 to V11 SP1 - missing Step 5.5

Created by: Leo at: 8/15/2011 8:55 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/15/2011 8:55 AM	Rate (0)
Leo Advanced Member Joined: 11/23/2005 Last visit: 11/5/2024 Posts: 9 Rating: (0)	Hallo, has anybody already got this message during migration? There is no suitable STEP 7 version installed. Please install STEP 7 V5.4 SP5 or STEP7 V5.5. Thanks. Leo Attachment MigrLog_InstSoft.jpg (761 Downloads)
	Last edited by: Leo at: 8/15/2011 10:09 AM
Suggestion To thank Quote Answer

8/15/2011 1:12 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	Hi, I suggest you try to instal the Update 1 for STEP 7 V11 SP1. Update1 for STEP 7V11 SP1 http://support.automation.siemens.com/WW/view/en/52258326?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/16/2011 9:30 AM	Rate (0)
Leo Advanced Member Joined: 11/23/2005 Last visit: 11/5/2024 Posts: 9 Rating: (0)	It helped. Thanks

Suggestion To thank Quote Answer

8/16/2011 12:05 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/24/2025 Posts: 4397 Rating: (1464)	you are wellcome
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

10/14/2011 3:12 AM	Rate (0)
climber_2003 Posts: 8 Rating: (0)	Dear expert, I did try the same way you proposed but still the same message popup."There is no suitable STEP 7 version installed. Please install STEP 7 V5.4 SP5 or STEP7 V5.5." Migrate failed. Please advice. Attachment Installed software.JPG (1117 Downloads)
climber_2003 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on