Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Migration from TP270 to TP277

Created by: Sreeram at: 10/1/2007 8:00 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/1/2007 8:00 AM	Rate (0)
Sreeram Posts: 53 Rating: (0)	Dear All, We have been supplying TP270 regualrly for an OEM. As i understand that, TP270 will be phased out from today onwards, need to migrate from TP270 to TP277. Could you please give me a checklist of what and all are to be taken care before migrating to TP277? Pl help. Regards Sreeram
Sreeram Posts: 53 Rating: (0)
Suggestion To thank Quote Answer

10/1/2007 9:44 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 2/19/2025 Posts: 8857 Rating: (1181)	Hi, The TP277 can be programmed by using WinCC flexible. So it depends whether you programmed the TP270 by using Protool or WinCC flexible. First you will have to migrate your Protool TP270 project to a WinCC flexible TP270 project. Then you can convert device TP270 to TP277 When you have WinCC flexible you can try it and have a look. Best regards, Wizard

Suggestion To thank Quote Answer

10/23/2007 11:11 AM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi, A "conversion list" can be found here. Please note that not all PLC jobs are available in the 277-series panels.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

11/1/2007 6:06 AM	Rate (0)
Sreeram Posts: 53 Rating: (0)	Dear Ones, Thanks a lot for the support. Regards Sree
Sreeram Posts: 53 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on